Press the or ZERO button. The corresponding coordinate plane will instantly register 0.0000 or 0.000 depending on your active resolution. Presetting Coordinates (Dimension Entry) When machining from a specific blueprint print datum point: Press the target axis key ( X or Y ). Press the SET key.
Modern DROs from brands such as Easson, SINO, Ditron, or new Acu‑Rite units offer:
Check the power cord and replace the internal glass fuse if broken. Dirt, oil, or metallic dust inside the glass scale.
: While original physical copies are rare, digital versions are available on sites like Scribd or through specialty vendors like Machinery Support . Common Issues to Watch For anilam mini wizard a163 manual
High-visibility green or red 7-segment LED characters. Axis Capability: 2 Axes (typically X and Y).
Compatible with Anilam’s precision glass scales. Power: Standard 115V AC (internal fuse protected). Installation and Setup
Over the years, users have reported several recurring problems. A comprehensive manual is key to resolving them: Press the or ZERO button
To reset a specific axis back to its initial starting point:
Configures the pulses per inch/mm. Set this incorrectly, and the DRO will display double or half the actual physical movement.
The A163 is sometimes referred to as the A163‑20000 XY Axis Controller. It is an older unit (likely from the late 1980s to mid‑1990s) and, as a result, original documentation is no longer available from the manufacturer. Press the SET key
If you are looking to expand your shop's capabilities or replace components on this unit,
Is your unit currently throwing a specific , or are you experiencing counting errors ? Are you setting this up on a mill or a lathe ?
Many industrial tool distributors (MSC Industrial, Penn Tool Co., CDCO Machinery) have old filing cabinets with paper manuals. Call their tech support and ask nicely. You might get a photocopy mailed to you for the cost of shipping.
Disclaimer: Anilam, Hexagon Metrology, and Acu-Rite are registered trademarks of their respective owners. This article is for informational purposes only and is not affiliated with or endorsed by Anilam or Hexagon.