Canon Service Tool V5610 -

With the printer in Service Mode, you can now run the software:

For many PIXMA printers, the steps are as follows:

If successful, a small dialogue box will pop up saying "A function was finished" or "Operation completed successfully" . canon service tool v5610

Unlike standard printer drivers, this tool accesses the printer's internal firmware (service mode) to perform low-level operations such as:

Using this tool requires the printer to be in a specific "Service Mode" before the software can communicate with it. 1. Entering Service Mode With the printer in Service Mode, you can

: While holding Stop, press and hold the Power button.

A "Function Share Completed" popup will appear, and the printer will print a single page containing counter data (e.g., D=000.0 ). Entering Service Mode : While holding Stop, press

: Resetting the digital counter does not clean the physical pads. If you reset the counter without replacing or washing the felt waste ink pads inside the base of the printer, ink will eventually overflow and ruin your desk or the internal printer circuitry.

: This usually happens if you forgot to put the printer into Service Mode, or if the printer dropped out of Service Mode due to a loose USB cable. Restart the computer, use a different USB port, and redo the button sequence carefully. Error Code 005

: Technicians can read or write the printer’s EEPROM data to check the total page count or restore settings after replacing a mainboard. Usage Requirements