Edmi Mk6n Genius User Manual !link!
Total Active Energy Export (Solar/generation feed-in) 3.8.0 / 4.8.0: Reactive Energy Import / Export 1.6.0: Maximum Demand (kW) Communication and Software Integration
The power that fluctuates between the source and the load, vital for tracking inductive motor loads.
The load profile functionality is one of the EDMI MK6N Genius's most powerful features, allowing it to store historical data for analysis. edmi mk6n genius user manual
The EDMI Mk6N is a three-phase electronic energy meter belonging to the acclaimed Genius series. It is an upgraded version of the highly successful Mk6, designed to meet new international standards and incorporate the latest in power supply and input protection technologies. This device is more than just a simple kWh counter; it is a sophisticated data acquisition platform capable of measuring a vast array of electrical parameters, from active, reactive, and apparent power to voltage, current, power factor, frequency, and even harmonics.
Connect CT secondary terminals to Meter Terminals 1 and 3. Connect Voltage Phase A to Terminal 2. Total Active Energy Export (Solar/generation feed-in) 3
EDMI Mk6N Genius is an advanced three-phase electronic revenue meter that builds upon the original Mk6 Genius platform
| Symptom | Possible Cause | Corrective Action | | :--- | :--- | :--- | | | No power supply. | Check voltage supply to terminals. Check fuses/breakers. | | Energy Not Counting | Wiring error or Low Load. | Verify CT polarity. Check if load is below the starting threshold. | | Erratic Reading | High interference or bad earth. | Ensure meter earth is connected. Check for ground loops on RS485. | | BAT Icon Lit | Internal battery low. | Contact utility or vendor for battery replacement to maintain RTC. | It is an upgraded version of the highly
Utilizes the EziScript language, allowing users to create custom extensions and register manipulations without firmware upgrades.
The small numbers on the left side of the screen identify the specific data item according to the international OBIS standard (e.g., 1.8.0 for Active Energy Import).
Use the three mounting holes (one top, two bottom) to secure the chassis.
