Nokia 7250 Ixr X1 Installation Guide |verified| Site

After completing the installation and basic setup, verify the hardware's health and software's stability.

: Use a Linux machine (CentOS 7 recommended) to create a bootable SD card or USB drive with the SR Linux image

Observe minimum bend radius guidelines for all fiber optic lines to prevent signal attenuation. 7. Initial Bootstrap and Software Configuration nokia 7250 ixr x1 installation guide

The 7250 IXR-X1 is designed for standard 19-inch racks. Because it is a 1RU unit, it is light enough for a single person to mount, though using a lift is always recommended for safety and precision.

: Slide the modular PSUs into the rear slots until they click into place. : Connect to a 200V–240V AC power source. After completing the installation and basic setup, verify

set routing-options static route 0.0.0.0/0 next-hop 192.168.1.1

The X1 chassis usually supports dual PSUs for redundancy (AC or DC depending on your order). Initial Bootstrap and Software Configuration The 7250 IXR-X1

The primary method for configuring SR Linux is through its Command Line Interface (CLI). You can access the CLI in two ways:

The chassis is heavy; use two people for lifting or a mechanical lift when placing it into the rack. Position the heaviest device at the bottom of the rack for stability.

: Use the provided mounting brackets to secure the front of the router to the rack rails.

Maintain a continuous ambient temperature between 0°C and 40°C (32°F to 104°F).