Patton Heater Model Poh2501 Manual |work| Jun 2026

Three adjustable settings, typically 900W and 1500W , allowing for energy-efficient temperature maintenance. Safety Features:

Plug the power cord directly into a standard 120-volt grounded AC outlet. Do not share the outlet with another high-wattage appliance. Setting the Controls

Large, smooth-rolling caster wheels and a front-mounted pull handle 2. Unpacking and Assembly Instructions

Set the thermostat to "High" to reach the desired room temperature quickly. Once reached, dial the thermostat back until the heater clicks off; it will then cycle automatically to maintain that level.

Use a vacuum cleaner with a soft brush attachment to clear debris from both the front exhaust grill and the rear intake grill. patton heater model poh2501 manual

If possible, place the unit back inside its original box or cover it with a plastic sheet to prevent dust accumulation during the spring and summer months. 7. Troubleshooting Guide

The Patton Heater Model POH2501 is a high-quality, portable heater designed to provide efficient and reliable heat to small to medium-sized spaces. With its compact design and powerful heating capabilities, this heater is perfect for use in homes, offices, garages, and workshops.

Never leave the heater running unattended or while you are sleeping. Always unplug the unit when it is not in use. 5. Built-In Safety Features

Place the heater only on a flat, level, and stable surface. Do not place it on carpets or rugs where the bottom intake might be blocked or where the tip-over switch cannot engage properly. Three adjustable settings, typically 900W and 1500W ,

The metal fins are expanding and contracting as they heat up and cool down.

Run the heater on a dedicated circuit. Operating other high-draw appliances on the same circuit will trip your breaker.

By following the guidelines and recommendations outlined in this article, you'll be well on your way to enjoying safe and efficient heating with your Patton Heater Model POH2501.

The model POH2501 is an oil-filled radiator, which operates on a simple principle: it uses electricity to heat a special oil sealed inside the unit, which then radiates heat into the room. Understanding its controls is the first step to using it effectively. Setting the Controls Large, smooth-rolling caster wheels and

Understanding the electrical requirements of your Patton POH2501 ensures safe operation and prevents tripped circuit breakers. POH2501 Heater Type: Fan-Forced Utility / Workshop Heater Voltage: 120V AC, 60Hz Power Settings: Low (1300 Watts), High (1500 Watts) Max Heat Output: 5,120 BTUs Amperage: 12.5 Amps (on High setting) Housing Material: Heavy-gauge steel with durable finish

: This heater is not intended for use in bathrooms, laundry areas, or similar humid indoor locations. Never place it where it might fall into a bathtub or water container.

The fan may stop, and no heat will emit, even though the unit is plugged in.

You need a cheap, powerful heater for a garage, workshop, job site, or enclosed porch. You don't need fancy timers or thermostats—just raw heat.