Canon Service Tool V.4713 Download !!link!! Instant

A tense silence filled the room, broken only by the rain.

Check the USB port setting to ensure the tool detects your printer. Under "Clear Ink Counter," select and click Set . Under "Ink Absorber Counter," select Main and click Set . Click EEPROM to save the changes. Restart your printer.

: Initiates deep cleaning cycles directly from your PC.

While still holding the Power button, (or 6 times for certain G-series models like the G2000). Release the Power button .

Press the on the physical printer to turn it off. (It may take up to 30 seconds to shut down completely as it saves the new EEPROM data). Canon Service Tool V.4713 Download

The Canon Service Tool V.4713 is an official service software program used by technicians to calibrate, test, and reset Canon Pixma printers.

This is the most common reason for using the Service Tool. Every Canon printer has a waste ink absorber pad that collects excess ink from cleaning cycles. Once this pad approaches capacity, a counter triggers an error and the printer stops functioning to prevent ink leaks. The Service Tool is used to after the physical pad has been replaced or thoroughly cleaned.

The Service Tool software unless the hardware is manually booted into "Service Mode" first. Follow these exact physical steps on your printer hardware:

: Users can perform deep cleanings and nozzle checks that may not be available through the standard printer driver. A tense silence filled the room, broken only by the rain

Once the reset is successfully completed — you may receive a confirmation message — exit the service tool. Turn off your printer, unplug it from the power source for a few moments, then power it back on. The error should be cleared, and normal printing should resume.

(while continuing to keep the Power button held down).

While still holding the Stop/Reset button, press and hold the Power button. The power LED will light up or blink.

Software resets the counter , but it does not physically replace the pads . If your printer is actually leaking ink onto your desk, you must physically replace the waste ink pads before resetting the counter. Under "Ink Absorber Counter," select Main and click Set

you have a supported printer, are handy with electronics, and understand the physical risk of ink overflow.

Therefore, . If you choose to download the software, you must take the following steps to protect your computer:

The printer will whir for a moment and move its print head. It will then print a single page containing a line of text that looks like: D=000.0 . This confirms the waste ink percentage is now officially 0%. Click on the software confirmation popup. Step 4: Finalizing the Process Close the Service Tool software.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

The V.4713 version is optimized for older and mid-generation Canon PIXMA, MAXIFY, and G-series ink-tank printers. Its primary functions include: 創達科技

: Incorrect use of these tools can brick the printer or void the warranty.