: The exact payload file name found inside your firmware folder.
Step-by-Step: How to Use the MT6768 Scatter File with SP Flash Tool
A scatter file is a plain-text configuration file used by MediaTek (MTK) Smart Phone Flash Tool (SP Flash Tool) to understand the partition structure of a device's internal storage (eMMC or UFS).
: The exact hex address where the partition begins on the physical storage chip.
While most MT6768 devices function perfectly well without owners ever encountering this file, it is essential for developers, repair technicians, and advanced users. This comprehensive guide will explain everything you need to know about the scatter file, from its technical structure to practical, step-by-step usage. mt6768-android-scatter.txt
: The partition table addresses defined in your scatter file do not match the partition addresses currently configured on the device's flash memory.
Are you encountering any specific in your flashing software?
- partition_index: SYS2 partition_name: boot file_name: boot.img is_download: true type: NORMAL_ROM linear_start_addr: 0x000000000D000000 physical_start_addr: 0x000000000D000000 partition_size: 0x0000000002000000 region: EMMC_USER storage: HW_STORAGE_EMMC Use code with caution. Key Parameter Breakdown:
In the MT6768 architecture, the very first partition mapped in the scatter file is the ( preloader_mt6768.bin ). : The exact payload file name found inside
Warning : Avoid using "Format All + Download" as this will permanently delete your device's NVRAM/IMEI calibration partitions, causing a total loss of cellular signal.
: Click the green Download button at the top. Connect the Device : Power down your phone completely.
The (typically named MT6768_Android_scatter.txt ) is the blueprint for devices powered by the MediaTek Helio P65 and Helio G80 chipsets. If you own a smartphone running on this hardware—such as various budget and mid-range models from Xiaomi, Samsung, Vivo, Oppo, or Realme—understanding this file is critical for flashing stock firmware, unbricking a dead device, or developing custom ROMs.
A scatter file is a plain text document that serves as a partition map for MediaTek (MTK) devices. Android devices do not store everything in a single block; instead, the storage memory (eMMC or UFS) is divided into multiple designated regions called partitions. While most MT6768 devices function perfectly well without
Thus, the mt6768-android-scatter.txt file for this chipset is more complex than older MediaTek scatter files.
A scatter file acts as a technical reference for your phone's storage structure. It contains detailed information for approximately 22 to 24 partitions, including:
A common error indicating that the scatter file does not match the hardware layout.
: Click on the Choose button next to the "Scatter-loading File" field. Navigate to your extracted firmware folder and select mt6768-android-scatter.txt .
Sometimes – but if the partition is mandatory for boot (e.g., md1img for modem), skipping it may cause boot hangs. Only skip non-critical partitions like cache or userdata .